Игорь_Я писал(а):мы лишь задаём процессору различные алгоритмы обработки векторов основного потока.
Был не прав.
В Смарт (IVE) вектора не обрабатываются, а обрабатывается, различными фильтрами, уже цветные блоки 3х3, путём их сравнения в двух кадрах, предварительно очищенных от шумов. По крайней мере по наличию следующих фильтров и функций можно приблизительно догадаться что там происходит.
Supports 3x3 template filter.
Supports color space conversion (CSC) from YUV to RGB.
Supports the compound function of 3x3 template filter + CSC from YUV to RGB.
Supports gradient computation of operators (such as sobel and scharr) in X/Y direction.
Supports the computation of canny gradient magnitude and direction.
Supports 3x3 erode.
Supports 3x3 dilate.
Supports image thresh.
Supports the AND operation of two images.
Supports subtract of two images.
Supports the OR operation of two images.
Supports integral computation.
Supports histogram statistics.
Supports a maximum running frequency of 300 MHz.
Supports independent soft reset.
Supports 64-bit AXI Master bus and 32-bit APB Slave bus.
Supports linked list interrupts and node interrupts.
Supports the query mode.
Supports gray images in input formats such as SP420 (semi-planar420) and SP422 (semi-planar422).
Supports gray images in output formats such as SP420, SP422, RGBpackage, and RGBplanar.
Supports non 8-byte alignment of read/write address of some operators.
По поводу отключения:
Clock Disable Policy
You can disable the input clock of the IVE to reduce the power consumption. Before disabling
the IVE clock, ensure that the IVE is idle by checking the register IVE_STATUS. If
IVE_STATUS[0] is 0, the IVE is idle. The configuration of the IVE register is not affected by
the clock disable policy. You need to enable the clock before operating internal registers of the
IVE.
Т.е. отключить можно, вот только откуда берутся фиолетовые тэги при отключенном IVE...