SD-9604AD-A не могу найти прошивку.

[M - 16.]

Принесли недозагружающийся четырёхканальник.
Помогите найти прошивку на похожий.
Обращение к USB-флешке есть.
Фотки прилагаю, заставка не факт, что родная.

[M - 16.]

Лог загрузки и заставка.

• resetэNAND: No NAND device found!!!
  0 MiB
  
  
  U-Boot 2008.10 (Feb 25 2012 - 10:16:48)
  
  DRAM: 128 MB
  Flash: 16 MB
  In: serial
  Out: serial
  Err: serial
  USB: scanning bus for devices... 1 USB Device(s) found
  norm:0
  0 Storage Device(s) found
  Press CTRL-C to abort autoboot in norm:0nds
  UpgradeSoftware:00000000
  CheckUpgrade invalid addr(0x00000000)
  failure
  jpeg decoding ...
  <<addr=0x80f20000, size=0x20000, vobuf=0xcfc00000>>
  LineBytes 33 == 1600
  <<imgwidth=800, imgheight=600, linebytes=1600>>
  decode success!!!!
  decode jpeg!
  jpeg decoding ...
  <<addr=0x80f40000, size=0x20000, vobuf=0xcfe00000>>
  LineBytes 33 == 1440
  <<imgwidth=720, imgheight=576, linebytes=1440>>
  decode success!!!!
  ## Booting kernel from Legacy Image at 80080000 ...
  Image Name: hilinux
  Image Type: ARM Linux Kernel Image (uncompressed)
  Data Size: 1372644 Bytes = 1.3 MB
  Load Address: c0800000
  Entry Point: c0800000
  Loading Kernel Image ... OK
  OK
  
  Starting kernel ...
  
  Uncompressing Linux........................................................................................ done, booting the kernel.
  Linux version 2.6.24-rt1-hi3515v100 (root@localhost.localdomain) (gcc version 3.4.3 (release) (CodeSourcery ARM Q3cvs 2004)) #1 Wed Sep 1 16:50:11 CST 2010
  CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
  Machine: hi3515v100
  Memory policy: ECC disabled, Data cache writeback
  CPU0: D VIVT write-back cache
  CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  Kernel command line: busclk=220000000 mem=32M console=ttyAMA0,115200 root=1f01 rootfstype=jffs2 mtdparts=physmap-flash.0:2M(boot),6M(rootfs),7M(app),128K(para),512K(logo),128K(kt_mac) pcimod=host pciclksel=1
  PID hash table entries: 128 (order: 7, 512 bytes)
  Console: colour dummy device 80x30
  Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  Memory: 32MB = 32MB total
  Memory: 29596KB available (2508K code, 237K data, 92K init)
  Mount-cache hash table entries: 512
  HI_VERSION=LINUX_2_6_24-M01C06FB02F @Hi3515v100R001_C_0_0_0 2010-08-11 17:51:09
  CPU: Testing write buffer coherency: ok
  net_namespace: 64 bytes
  NET: Registered protocol family 16
  Hisilicon clock system V0.01
  SCSI subsystem initialized
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  NET: Registered protocol family 2
  Time: hisi_timer1 clocksource has been installed.
  IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  TCP: Hash tables configured (established 1024 bind 1024)
  TCP reno registered
  NetWinder Floating Point Emulator V0.97 (double precision)
  JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
  yaffs Sep 1 2010 16:44:46 Installing.
  io scheduler noop registered
  io scheduler deadline registered (default)
  Serial: AMBA PL011 UART driver
  uart:0: ttyAMA0 at MMIO 0x20090000 (irq = 12) is a AMBA/PL011
  console [ttyAMA0] enabled
  uart:1: ttyAMA1 at MMIO 0x200a0000 (irq = 12) is a AMBA/PL011
  uart:2: ttyAMA2 at MMIO 0x200b0000 (irq = 13) is a AMBA/PL011
  uart:3: ttyAMA3 at MMIO 0x200c0000 (irq = 13) is a AMBA/PL011
  RAMDISK driver initialized: 4 RAM disks of 16384K size 4096 blocksize
  loop: module loaded
  physmap platform flash device: 04000000 at 80000000
  physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
  Amd/Fujitsu Extended Query Table at 0x0040
  physmap-flash.0: CFI does not contain boot bank location. Assuming top.
  number of CFI chips: 1
  cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  6 cmdlinepart partitions found on MTD device physmap-flash.0
  Creating 6 MTD partitions on "physmap-flash.0":
  0x00000000-0x00200000 : "boot"
  0x00200000-0x00800000 : "rootfs"
  0x00800000-0x00f00000 : "app"
  0x00f00000-0x00f20000 : "para"
  0x00f20000-0x00fa0000 : "logo"
  0x00fa0000-0x00fc0000 : "kt_mac"
  No NAND device found!!!
  hi3515v100-ehci hi3515v100-ehci.0: hi3515v100-ehci
  hi3515v100-ehci hi3515v100-ehci.0: new USB bus registered, assigned bus number 1
  hi3515v100-ehci hi3515v100-ehci.0: irq 23, io mem 0x100b0000
  hi3515v100-ehci hi3515v100-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
  usb usb1: configuration #1 chosen from 1 choice
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: 2 ports detected
  hi3515v100-ohci hi3515v100-ohci.0: hi3515v100-ohci
  hi3515v100-ohci hi3515v100-ohci.0: new USB bus registered, assigned bus number 2
  hi3515v100-ohci hi3515v100-ohci.0: irq 22, io mem 0x100a0000
  usb usb2: configuration #1 chosen from 1 choice
  hub 2-0:1.0: USB hub found
  hub 2-0:1.0: 2 ports detected
  TCP cubic registered
  Initializing XFRM netlink socket
  NET: Registered protocol family 1
  VFS: Mounted root (jffs2 filesystem).
  Freeing init memory: 92K
  init started: BusyBox v1.1.2 (2008.09.26-11:18+0000) multi-call binary
  
  _ _ _ _ _ _ _ _ _ _ _ _
  \ _ _ _ _ _ ___
  / /__/ \ |_/
  / __ / - _ ___
  / / / / / /
  _ _ _ _/ / / \_/ \_ ______
  ___________\___\__________________
  
  [RCS]: /etc/init.d/S00devs
  [RCS]: /etc/init.d/S01udev
  [RCS]: /etc/init.d/S3515init
  Hisilicon ETH net controler(ver Mar 25 2011 18:49:05).
  Hisilicon ETH MDIO Bus: probed
  Invalid HW-MAC Address: 00:00:00:00:00:00
  Set Random MAC address: 46:04:A9:93:BB:98
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110104: 0x00009654 --> 0x00009654
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110100: 0x00000887 --> 0x00000887
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x2011010c: 0x00000003 --> 0x00000003
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110110: 0x00000007 --> 0x00010303
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110114: 0x00000007 --> 0x00010303
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110118: 0x00010F01 --> 0x00000007
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x2011011c: 0x00010F01 --> 0x00000007
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110128: 0x00010020 --> 0x00010020
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x2011012c: 0x000103A2 --> 0x00010601
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110130: 0x00000005 --> 0x00010803
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110134: 0x00000007 --> 0x00000007
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20110138: 0x00010804 --> 0x00010804
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x2011013c: 0x00000007 --> 0x00000007
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20050078: 0x00000000 --> 0x00008002
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x20050054: 0x00004000 --> 0x00001573
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x200f0094: 0x00000000 --> 0x00000001
  *** Board tools : ver0.0.1_20060106 ***
  [debug]: {source/utils/cmdshell.c:166}cmdstr:himm
  0x200f0098: 0x00000000 --> 0x00000001
  Hisilicon Media Memory Zone Manager
  hi3515 if defined
  add0a is 1f
  tw2865 0x50 set to PAL mode ok!
  init chip_addr80 ok
  warning: tw2865 0x52 i2c_read err, val:0xff!!!
  hi3515 if defined
  add0a is 1f
  tw2865 0x52 set to PAL mode ok!
  tw2865 driver init successful!
  hifb: module license 'Proprietary' taints kernel.
  hifb info: HIFB_MAIN_VERSION[v1.0.0.2] Build Time[Aug 11 2010, 18:11:30]
  hifb info: video:vram2_size=900000,vram3_size=80000,vram0_size=10000000,vram1_size=1024,vram4_size=1024
  hifb info: succeed in registering the fb0: ovl2 frame buffer device
  hifb info: succeed in registering the fb1: ovl3 frame buffer device
  hifb info: succeed in registering the fb2: ovl0 frame buffer device
  hifb info: succeed in registering the fb3: ovl1 frame buffer device
  hifb info: succeed in registering the fb4: ovl4 frame buffer device
  TDE_MAIN_VERSION[v2.0.0.0] Build Time[Aug 11 2010, 18:11:32]
  TDE_ADP_VERSION[hi3515adp v2.0.0.0] Build Time[Aug 11 2010, 18:11:32]
  tde run on master arm
  tde run for graphic service
  tde map reg:basePhyAddr:20140000 baseVirAddr:c2878000 size:3000
  Hisilicon UMAP device driver interface: v3.00
  Chip Version: Hi35150100
  load vd.ko ....OK!
  load vou.ko ....OK!
  load vdec.ko ....OK
  load vpp.ko ....OK!
  load md.ko....OK!
  load h264d.ko OK
  Driver 'sd' needs updating - please use bus_type methods
  scsi0 : hi3515-ahci-device
  scsi1 : hi3515-ahci-device
  ata1: SATA max UDMA/133 irq 29
  ata2: SATA max UDMA/133 irq 29
  ata1: SATA link down (SStatus 0 SControl 300)
  ata2: SATA link down (SStatus 0 SControl 300)
  mice: PS/2 mouse device common for all mice
  usbcore: registered new interface driver usbhid
  drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  Initializing USB Mass Storage driver...
  usbcore: registered new interface driver usb-storage
  USB Mass Storage support registered.
  HISI_IRDA-MF @Hi3515v100R001_C_0_0_0 2010-08-11 17:54:08
  hiir: init ok. ver=Aug 11 2010, 17:54:09.
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94
  Data CRC e37b6868 != calculated CRC 0bb422b1 for node at 002e1d94

[M - 16.]

Логу доверия тоже нет: на борту TW2866

[M - 16.]

Проц приказал долго жить.
Зато нашёл близнеца - Falcon Eye FE-004H Light
потроха идентичные.

[denxxxx]

Принесли недозагружающийся четырёхканальник.
Помогите найти прошивку на похожий.
Обращение к USB-флешке есть.
Фотки прилагаю, заставка не факт, что родная.

так что проблема решена? прошивка есть??? решение есть???

[denxxxx]

так все таки прошивка есть??

[M - 16.]

Посмотрю на работе завтра.

[denxxxx]

Falcon Eye FE-004H Light прошивка интересно подойдет?? к этому чуду sd-9604ad-a кто нибудь в курсе???

[denxxxx]

sd-9604ad-a нужна прошивка к этому чуду! короче завис логотип может для начала сделать reset? где инструкцию взять?

[Fluffykrsk]

На Sarmatt DSR 803-h похожа, но там АЦП TW2868, а тут я так понял 2866.
На Optimus REC-1008E тоже похожа (АЦП не знаю какое там), но там дамп 8Мб весит.

Внешне смахивают по шасси, понятно, что 8-ки это.

У вас память точно на 16Мб?
Дохлый дамп сливали?

На FE-004H у меня есть какие-то заплатки, но по тексту FE-004H Light фигурирует, фиг знает чем они отличаются, аппараты старые.

[denxxxx]

Посмотрю на работе завтра.

посмотри пожалуйста!

[M - 16.]

Поискал, не нашёл