DVR 1916D Перезагрузка во время запуска

Вопросы по восстановлению, настройке, апгрейду, прошивкам и т.п.
Ответить
alexandr_rob
Новичок
Сообщения: 1
Зарегистрирован: 19 июн 2021, 19:26

DVR 1916D Перезагрузка во время запуска

Сообщение alexandr_rob » 20 июн 2021, 08:56

Доброго всем дня. Регистратор(модель на фото во вложении) постоянно перезагружается. Куда копать?

лог загрузки:
?

U-Boot 2008.10 (Jun 29 2010 - 22:30:03)

DRAM: 128 MB
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
MAC: 36-81-33-A9-89-26
Press CTRL-C to abort autoboot in 1 seconds## Booting kernel from Legacy Image at e2a00000 ...
Image Name: Linux-2.6.24-rt1-hi3520v100
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1417160 Bytes = 1.4 MB
Load Address: e2800000
Entry Point: e2800000
## Loading init Ramdisk from Legacy Image at e3000000 ...
Image Name: initrd in cramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 3571712 Bytes = 3.4 MB
Load Address: 00000000
Entry Point: 00000000
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux.......................................................................................... done, booting the kernel.
Linux version 2.6.24-rt1-hi3520v100 (pub@BVT-SDK-63) (gcc version 3.4.3 (release) (CodeSourcery ARM Q3cvs 2004)) #1 Tue Jun 29 22:33:30 CST 2010
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387f
Machine: hi3520v100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIPT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
Kernel command line: mem=32M console=ttyAMA0,115200 mac=36:81:33:A9:89:26
PID hash table entries: 128 (order: 7, 512 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 25960KB available (2580K code, 238K data, 100K init)
Mount-cache hash table entries: 512
HI_VERSION=LINUX_2_6_24-M01C04FB01F @Hi3520v100R001_C_0_2_0 2010-06-29 22:31:34
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
Hisilicon clock system V0.01
pci clk devider is out of range:0~3!
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: hisi_timer1 clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 3488K
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) A© 2001-2006 Red Hat, Inc.
yaffs Jun 29 2010 22:33:15 Installing.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0x20090000 (irq = 12) is a AMBA/PL011
console [ttyAMA0] enabled
uart:1: ttyAMA1 at MMIO 0x200a0000 (irq = 12) is a AMBA/PL011
RAMDISK driver initialized: 4 RAM disks of 16384K size 4096 blocksize
loop: module loaded
physmap platform flash device: 04000000 at 80000000
physmap-flash physmap-flash.0: map_probe failed
No NAND device found!!!
h2v100-ehci h2v100-ehci.0: h2v100-ehci
h2v100-ehci h2v100-ehci.0: new USB bus registered, assigned bus number 1
h2v100-ehci h2v100-ehci.0: irq 23, io mem 0x100b0000
h2v100-ehci h2v100-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
h2v100-ohci h2v100-ohci.0: h2v100-ohci
h2v100-ohci h2v100-ohci.0: new USB bus registered, assigned bus number 2
h2v100-ohci h2v100-ohci.0: irq 22, io mem 0x100a0000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3488KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.

init started: BusyBox v1.1.2 (2010.06.29-14:29+0000) multi-call binary

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ _/ / / \_/ \_ ______
___________\___\__________________

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
[RCS]: /etc/init.d/S80network
HISI_PCI-MF @Hi3520v100R001_C_0_2_0 2010-06-29 22:34:31
hi3520_pci_driver.c: v0.0
is_host 0
##################################################
@@@@,slot num:0
##################################################
share memory: phys addr (c0000000), size(800000)
************************ load pci trans ok ********************************
base 0xc3000000 end 0xc3800000
hal_dev->slot = 0
local id = 1
PCI: slot 1
PCI: host communicate hw layer setup!
************************ load pci mcc ok ********************************
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110104: 0x00009876 --> 0x00009654
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110100: 0x00000888 --> 0x00000886
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011010c: 0x00000001 --> 0x00000002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110110: 0x00000002 --> 0x00000006
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110114: 0x00000003 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110118: 0x00000005 --> 0x00000006
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011011c: 0x00000006 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110128: 0x00000007 --> 0x00010020
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011012c: 0x00000007 --> 0x000103A1
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110130: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110134: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110138: 0x00000007 --> 0x00000004
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011013c: 0x00000007 --> 0x00000004
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20050078: 0x00000000 --> 0x00008002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120100: 0x00000444 --> 0x00000444
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120104: 0x00009876 --> 0x00009654
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012010c: 0x00000001 --> 0x00010640
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120110: 0x00000002 --> 0x00000003
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120114: 0x00000003 --> 0x00000004
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120118: 0x00000005 --> 0x00000001
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012011c: 0x00000006 --> 0x00000002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {sourcHisilicon Media Memory Zone Manager
e/utils/cmdshell.c:166}cmdstr:himm
0x20120128: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012012c: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120130: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120134: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20120138: 0x00000007 --> 0x00000005
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2012013c: 0x00000007 --> 0x00000005
[ipcm_vdd_init, 422]: local_cpu_id = 36

[ipcm_vdd_close, 268]: handle 0xc1e16a40

[ipcm_vdd_init, 455]: IPCM hardware initialized successfully 0

Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
hifb: module license 'Proprietary' taints kernel.
hifb info: HIFB_MAIN_VERSION[v1.0.0.2] Build Time[Jun 29 2010, 23:55:55]
hifb info: video:vram0_size=4000000,vram1_size=2000000,vram2_size=2000000,vram3_size=2000000,vram4_size=2000000
hifb info: succeed in registering the fb0: ovl0 frame buffer device
hifb info: succeed in registering the fb1: ovl1 frame buffer device
hifb info: succeed in registering the fb2: ovl2 frame buffer device
hifb info: succeed in registering the fb3: ovl3 frame buffer device
hifb info: succeed in registering the fb4: ovl4 frame buffer device
TDE_MAIN_VERSION[v2.0.0.0] Build Time[Jun 29 2010, 23:55:58]
TDE_ADP_VERSION[hi3520adp v2.0.0.0] Build Time[Jun 29 2010, 23:55:58]
tde run on master arm
tde run for graphic service
tde map reg:basePhyAddr:20140000 baseVirAddr:c2878000 size:3000
Hisilicon UMAP device driver interface: v3.00
Chip Version: Hi35200100
load vd.ko ....OK!
load simd.ko OK
load vdec.ko ....OK
load vpp.ko ....OK!
load md.ko....OK!
************************ load hi3520 mpp ok ********************************
subscribe event 5
Auto login as root ...
Jan 1 00:00:03 login[398]: root login on `ttyS000'




BusyBox v1.1.2 (2010.06.29-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

[1;32mWelcome to HiLinux.[0;39m
None of nfsroot found in cmdline.
~ $

receive doorbell 5 from host ok [ IPCM_Check, 222]: remote not ready, now connect and wait ...

receive pid >>>>>> (22311)
****************************************************************************
*ProductType = PROD_D8416 *
**********************************************[ IPCM_Check, 252]: remote connected
******************************
Product: 22113 CapVer: Mar 6 2012 09:54:31
MPP Init..............
pci local id is 1
PCIV_WaitConnect....
open msg dev ok, fd:19
start check pci target id:0 ... ... ...
have checked pci target id:0 ok !
PF AHB address:0xc0000000
<<<<<<<<<<<<Processing PCIV Slave Message>>>>>>>>>>>>>>
<<<<<<<<<<<<Lexus King is now Testing!!!!>>>>>>>>>>>>>>

Recv Message : SYS
slave set time successful...

Recv Message : SYS
watchdog timeout enabled
watchdog timeout was set to 10 seconds
watchdog port was set to 238

Recv Message : VIDEO
VI_Create() OK MaxChn (8) ...............
VO_CascadeCreateDev(vodev=0, s32Pos = 0 &&&&&&&&&&&&&&&&
VO_Create(0) VoChn(9)==============================>
Slave 2 chip Video is running ...

Recv Message : VIDEO
VI_SetUserPic, u32PhyAddr ===============> 0xc528a000 ..
length = 506880
MPP_MapMemory: phyaddr = 0xc528a000, length = 506880, virAddr = 0x400a5000 !!!
VI_SetUserPic, pVirAddr ===============> 0x400a5000 ..
PCIV_SlaveBlindCreate

Recv Message : CAPTURE
PCIV_SlaveCaptureCreate ......
open 142.............
open 174.............
PCIV_Trans_InitSender ok, handle:0x1470e8, remote:0, dma_buf:0xc8ce2000,len:3145728; tmp_buf:(0xc811e000,0x40121000), msgport:(174,142)
open 143.............
open 175.............
PCIV_Trans_InitSender ok, handle:0x147130, remote:0, dma_buf:0xc8fe2800,len:3145728; tmp_buf:(0xc841e800,0x40421800), msgport:(175,143)
open 144.............
open 176.............
PCIV_Trans_InitSender ok, handle:0x147178, remote:0, dma_buf:0xc92e3000,len:3145728; tmp_buf:(0xc871f000,0x40722000), msgport:(176,144)
open 145.............
open 177.............
PCIV_Trans_InitSender ok, handle:0x1471c0, remote:0, dma_buf:0xc95e3800,len:3145728; tmp_buf:(0xc8a1f800,0x40a22800), msgport:(177,145)
open 146.............
open 178.............
PCIV_Trans_InitSender ok, handle:0x147208, remote:0, dma_buf:0xc98e4000,len:3145728; tmp_buf:(0xc8d20000,0x40d23000), msgport:(178,146)
open 147.............
open 179.............
PCIV_Trans_InitSender ok, handle:0x147250, remote:0, dma_buf:0xc9be4800,len:3145728; tmp_buf:(0xc9020800,0x41023800), msgport:(179,147)
open 148.............
open 180.............
PCIV_Trans_InitSender ok, handle:0x147298, remote:0, dma_buf:0xc9ee5000,len:3145728; tmp_buf:(0xc9321000,0x41324000), msgport:(180,148)
open 149.............
open 181.............
PCIV_Trans_InitSender ok, handle:0x1472e0, remote:0, dma_buf:0xca1e5800,len:3145728; tmp_buf:(0xc9621800,0x41624800), msgport:(181,149)
CaptureCreate(0) ok.
CaptureCreate(1) ok.
CaptureCreate(2) ok.
CaptureCreate(3) ok.
CaptureCreate(4) ok.
CaptureCreate(5) ok.
CaptureCreate(6) ok.
CaptureCreate(7) ok.

Recv Message : SYS
Pciv_SlaveSysInitWinVb ....

Recv Message : SYS
PF AHB addr:0xc0000000
func:PCIV_SlaveSysMalloc, phyaddr:0x168000 = 0xc0168000 - 0xc0000000

Recv Message : PLAY
STREAM_Proc pid = 424.......
VDEC_BindToVo(0, VO_DEV_HD, 9);PCIV_Trans_InitReceiver ok, remote:0, addr:(0xc0168000,0x41b22000), buflen:262144, msgport:(222,206)

Recv Message : SYS
PF AHB addr:0xc0000000
func:PCIV_SlaveSysMalloc, phyaddr:0x1a8000 = 0xc01a8000 - 0xc0000000

Recv Message : PLAY
STREAM_Proc pid = 428.......
VDEC_BindToVo(1, VO_DEV_HD, 10);PCIV_Trans_InitReceiver ok, remote:0, addr:(0xc01a8000,0x41cf7000), buflen:262144, msgport:(223,207)

Recv Message : SYS
PF AHB addr:0xc0000000
func:PCIV_SlaveSysMalloc, phyaddr:0x1e8000 = 0xc01e8000 - 0xc0000000

Recv Message : PLAY
STREAM_Proc pid = 432.......
VDEC_BindToVo(2, VO_DEV_HD, 11);PCIV_Trans_InitReceiver ok, remote:0, addr:(0xc01e8000,0x41ecc000), buflen:262144, msgport:(224,208)

Recv Message : SYS
PF AHB addr:0xc0000000
func:PCIV_SlaveSysMalloc, phyaddr:0x228000 = 0xc0228000 - 0xc0000000

Recv Message : PLAY
STREAM_Proc pid = 436.......
VDEC_BindToVo(3, VO_DEV_HD, 12);PCIV_Trans_InitReceiver ok, remote:0, addr:(0xc0228000,0x420a1000), buflen:262144, msgport:(225,209)

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : AUDIO

Recv Message : PLAY

Recv Message : PLAY

Recv Message : PLAY

Recv Message : PLAY

Recv Message : SPLIT

Recv Message : SPLIT
set VO Chn 0 attribute(0,0,1280,720) ok ! 0

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetTimeFormat ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(0, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(0, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(1, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(1, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(2, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(2, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(3, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(3, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(4, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(4, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(5, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(5, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(6, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(6, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(7, 0, 4, 0) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 1638

Recv Message : CAPTURE
PCIV_SlaveCaptureSetFormat ......
CaptureSetFormat(7, 1, 4, 4) ......
pFormat->FramesPerSecond = 25 pFormat->CodeSize = 217

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 0, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 1, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 2, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 3, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 4, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 5, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 6, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE
PCIV_SlaveCaptureSetCover ......

Recv Message : CAPTURE

Recv Message : CAPTURE
CaptureSetTitle ============================>
chanel = 7, idx=1, x=0, y=264, w=56, h=24, bmp=0xbddff83c, enable=1
SoftDog: Initiating system reboot. <-- В этом месте постоянный перезапуск
Вложения
IMAG2563.jpg
IMAG2562.jpg
IMAG2561.jpg

Ответить

Вернуться в «Восстановление и настройка»