Вторая часть лога.
Код: Выделить всё
*********************************************************
dvrhelper libdvr version: 25245 Oct 13 2017 15:21:00
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[LIBDVR] father process(dvrhelper) waitting for State = 0...
+++++++++++++++++++++++++++++++++
Name:storage
Version:1.03.0
Build date:Oct 13 2017 15:19:38
Desc:DriverManager release
+++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++
Name:manager
Version:1.03.1
Build date:Oct 13 2017 15:19:38
Desc:
+++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++
Name:manager
Version:1.03.1
Build date:Oct 13 2017 15:19:38
Desc:
+++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++
Name:guictrls
Version:1.05.5
Build date:Oct 13 2017 15:19:38
Desc:GUI ctrls Relese
+++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++
Name:OS
Version:1.00.1
Build date:Oct 13 2017 15:19:38
Desc:OS Relese
+++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++
Name:OS
Version:1.00.1
Build date:Oct 13 2017 15:19:38
Desc:OS Relese
+++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++
Name:OS
Version:1.00.1
Build date:Oct 13 2017 15:19:38
Desc:OS Relese
+++++++++++++++++++++++++++++++++
##############Setup SSL mutex Success!#####################
main(2, /var/Challenge buf)
CApplication CMOSGetCaps CMOS_USE_APP :2
[LIBDVR] ERROR (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/rtc/rtc_soc_func.c|RtcSocSetUserReg|138): didn't open device first.
[LIBDVR] ERROR (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/rtc/rtc_soc_func.c|RtcSocSetUserReg|138): didn't open device first.
[LIBDVR] ERROR (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/rtc/rtc_soc_func.c|RtcSocSetUserReg|138): didn't open device first.
[LIBDVR] ERROR (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/rtc/rtc_soc_func.c|RtcSocSetUserReg|138): didn't open device first.
| libres version: 24890 - Oct 13 2017 15:20:52
[LIBCOM] GpioManager Init sucessed.
| libcom version: 24945 - Oct 13 2017 15:20:51
[LIBDVR] system using watchdog to reboot.
[LIBDVR] system using watchdog to shutdown.
GpioDevProbing(port:0 bit:3 Idx:0 type:0)
Alloc New Gpio(port:0 bit:3 Idx:0 type:0)
[LIBDVR] system beep type: GPIO.
[LIBCOM] mtd partition boot+env, fd is 18
[LIBDVR] EnvBuf Size=10000, used Size=1284
[LIBDVR] no alarm in dev
[LIBDVR] no alarm out dev!!
[LIBDVR] noNeed to set alarm valid type in dev
[LIBDVR] Create alarm in device success
[LIBDVR] Create alarm out device success
[LIBDVR] Create alarm out device success
GpioDevProbing(port:5 bit:7 Idx:0 type:0)
Alloc New Gpio(port:5 bit:7 Idx:0 type:0)
GpioDevProbing(port:6 bit:0 Idx:0 type:0)
Alloc New Gpio(port:6 bit:0 Idx:0 type:0)
[LIBCOM] mtd partition rootfs, fd is 19
[LIBCOM] mtd partition Log, fd is 20
[LIBCOM] mtd partition web, fd is 21
[LIBCOM] mtd partition custom, fd is 22
[LIBCOM] mtd partition logo, fd is 23
[LIBCOM] mtd partition config, fd is 24
[LIBCOM] mtd partition backup, fd is 25
[LIBDVR] no cmos dev
[LIBDVR] Cmos dev init success
[LIBDVR] SOC RTC initing...
[LIBDVR] Rtc dev init success
[LIBDVR] no dev
[LIBDVR] unknow dev type
[LIBDVR] SERIAL_TYPE_UNKNOW
| libad version: 24890 - Oct 13 2017 15:20:48
[LIBDVR] WARN (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/system/system_func.c|SysGetTimezone|246): Time zone not set.
[LIBDVR] Setting system time to RTC time.
no front board key or not support, row = 0, col = 0
[LIBDVR] WARN (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/misc/misc_datastate_dev.c|DataDevNoCreate|68): You should not call this func in this system.
[LIBDVR] WARN (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/gps/gps_device.c|GpsDevInit|241): No GpsDev
[LIBDVR] Creating New IR Devs, Total 0 Devices
[LIBDVR] DH_BASELINE_2_0 not implement this module
*********************************************************
| PRODUCT INFORMATION
| libsysbase version: 25245 - Oct 13 2017 15:21:03
| 1.system information
| ProductName: dhi_nvr2108_8p_s2
| ModCapMask: 0
| GpsModType: NO
| ForNRT: NO
| ForATM: NO
| HasAudioBoard: YES
| HasLoopBoard: NO
| HasMatrixBoard: NO
| HasPtzBoard: YES
| HasWlanBoard: NO
| BeepType: GPIO
| SystemRestType: TEMP DON'T KNOW
| DspCount: 0
| ProductType: NVR
| ProductSubType: NO
| CpldVersion: 102
| CpuChipType: Unknow
| IsInland: ABROAD
| SupportEsata: NO
| SupportPm: NO
| AppVersion: 0
| SdcardToDisk: NO
| NetType: Poe
| SwitchPoeNumber: 4
| DspChip: NONE
| VideoChip: No chip
| AudioMode: STxx control
| FbdSize: Base
| NetCard: Single
| FbdDigit: NO
| FbdShift: NO
| AudioInterface: Self_audio
| SupportHdmi: YES
| VideoTour: YES
| DiskInterface: YES
| SupportLcd: NO
| HdVersion: 0
| ProductVersion: A
| DevSubType: 0
| PoePortNum: 0
| ProductTypeV2: 0
| ProductSubTypeV2: 0
| CpuChipIdV2: 0
| VideoInputNumV2: 0
| VideoOutputNumV2: 0
| AudioInputNumV2: 0
| AudioOutputNumV2: 0
|VideoStreamInputNumV2: 8
|AudioStreamInputNumV2: 0
| VideoChnEncodeNumV2: 0
| AudioChnEncodeNumV2: 0
| VideoChnDecodeNumV2: 0
| AudioChnDecodeNumV2: 0
| 2.Env information
| Env startaddr: 0x50000
| Env size: 0x10000
| 3.Alarm information
| Alarm in: 0
| Alarm out: 0
| 4.Frontboard information
| Frontboard count: 1
| 5.Flash information
| Flash chip count: 1
| chip 0 size: 0x1000000
| chip 0 baseaddr: 0xa0000000
| 6.Cmos,Rtc information
| Cmos,Rtc chip: Unknow
| Cmos,Rtc chip addr: 0x0
| Cmos offset: 0x0
| 7.others information
| VideoChannel: 0
| AudioChannel: 1
| DigitalChannel: 8
| DiskNumber: 1
| CDRomSupportNum: 1
| PlayBackNum: 8
| SupportRs232: NO
| SupportRs485: NO
*********************************************************
shellCmd_main
libhicap.a INFO (func = CaptureGetChannels line =>782): hicap_GetDevTotalChn=8
libaudio.a INFO (func = AudioCreate line =>891): ******************************************************************************
libaudio.a INFO (func = AudioCreate line =>892): 5X00: libaudio.a Version: V1.00.17 Svn: 8869 Compile at Oct 13 2017 15:57:50
libaudio.a INFO (func = AudioCreate line =>893): ******************************************************************************
libaudio.a INFO (func = AudioCreate line =>923): ao=0 HDMI ao = 1
libaudio.a INFO (func = AudioInGetChannels line =>3354): audio_chl = 1
CFrontboardImp::CFrontboardImp()>>>>
FrontboardCreate :0
CKeyboardDefault::CKeyboardDefault
CKeyboardDefault::addCommand getfbdtype
CKeyboardDefault::addCommand keepalive
CKeyboardDefault::getCommand getfbdtype
CCommandGetFbdType::operate(1)!
InitFrontboardParam FrontboardRead..............
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
crypto end ....
warn: CFrontboardImp::getFrontboardParam m_IsInit over time!
CFBD::CFBD m_FBDType:0
CFBD::CFBD m_OEMType:-1
VFD unknown type!!!!!:recordhl
VFD unknown type!!!!!:remote
FBD unknown type!!!!!hddsunell
VFD unknown type!!!!!:hddsunell
FBD unknown type!!!!!netsunell
VFD unknown type!!!!!:netsunell
VFD unknown type!!!!!:alarmh
VFD unknown type!!!!!:alarml
VFD unknown type!!!!!:status
VFD unknown type!!!!!:statussecond
VFD unknown type!!!!!:ptz
VFD unknown type!!!!!:diskrecstatus
VFD unknown type!!!!!:backup
VFD unknown type!!!!!:keepalive
VFD unknown type!!!!!:shutreboot
FBD unknown type!!!!!showtime
FBD unknown type!!!!!comm
FBD unknown type!!!!!play
FBD unknown type!!!!!playpause
FBD unknown type!!!!!playfast
FBD unknown type!!!!!playslow
FBD unknown type!!!!!playback
FBD unknown type!!!!!screenctrl
**************************************************************
[N5X libplay.a] V1.01.30 for 9 chs
Compile at Oct 13 2017 15:21:39 SVN:29629
**************************************************************
libhicap.a INFO (func = Hicap_InitHiMppVbParam line =>2142): chn_num=0,digitalch:8 video_chip=0, cpu_chip=9, enc_type=0, abroad_info=0 product:6!
[N5X libvos] INFO (func = __InternalInitVoutAttr line =>455): cpu:9 spot:0 tv:0 vga:1 vir:0 VoutNum:1
libhicap.a INFO (func = Hicap_InitHiMppVbConfig line =>2554): VB Init Successful
libhicap.a INFO (func = Hicap_InitHiMppSysConfig line =>2758): pstSysConf:16
libhicap.a INFO (func = Hicap_InitHiMppSysConfig line =>2769): Sys config Init Successful
libhicap.a INFO (func = SampleSysInit line =>1015): System Init Successful
[N5X libvos] INFO (func = HiVos_open line =>7097): PreviewVpssStart:0 Vodev:0 SubChn:2
[N5X libvos] INFO (func = HiVos_open line =>7123): PlayBackVpssStart:0 Vodev:0 SubChn:2
[LIBDVR] file context: mem=293M console=ttyAMA0,115200 root=/dev/mtdblock1 rootfstype=squashfs hwidtype=1 dh_keyboard=0 load_modules=1 mac_info=82436 env_off=327680 env_size=65536 secerase=0
[LIBDVR] WARN (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/system/system.c|GetResolutionResetFlag|576): Not find need_reset!
[N5X libvos] INFO (func = GetConfiguration line =>6821): GetResolutionResetFlag:0
[N5X libvos] INFO (func = GetConfiguration line =>6917): New Resolution:4 Vstd:PAL, OutType:VGA
[N5X libvos] INFO (func = HiVos_open line =>7141): HD:0 HD1:-1 TV:-1 SPOT:-1 VIR:-1 SMART:0 ENCTYPE:0 MaxVideoChn:9 MaxSplitNum:8
[N5X libvos] INFO (func = VideoOutInit line =>218): VoDev:0 enIntfSync:18 Type:36 Sync:18 W:1280 H:1024 fps:30
HDMI start success.
../src/layer/hilayer.c INFO (func = OpenGraphicsLayer line =>279): x:1280, y:1024, xv:1280, yv:1024
[N5X libvos] INFO (func = SetCSC line =>6195): dev:0 luma:50 contra:50 hue:50 sat:50
[N5X libvos] INFO (func = OpenBlit line =>59): ret:0 u8ThresholdValue:0xff
[N5X libvos] INFO (func = OpenBlit line =>63): ret:0 bEnAlphaThreshold:0
[N5X libvos] INFO (func = OpenBlit line =>67): ret:[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
0 DeflickerLevel:0
******************************************************************************
HI3520+: libvos.a Version: V0.03.42 Svn: 29622 Compile at Oct 13 2017 15:57:53
******************************************************************************
* Maxchannel:9, Vstd:0
*************************************************************
[N5X libplay.a] V1.01.30 Debug:(LibPlayInit|1024):DSPType:0,cpuchip:9 MaxPlayChannel:9
[N5X libvos] INFO (func = VideoCtrlTaskFunc line =>6925): func VideoCtrlTaskFunc ,pid 1008
HIDecTask in :PlaySendStreamThread() 331 pid 1011 startch:0 param:0
HIStreamTask in :PlayStreamThread() 832 pid 1010
HIDecTask in :PlayCmdThread() 372 pid 1009
HIDecTask in :PlaySendStreamThread() 331 pid 1012 startch:1 param:0x1
HIDecTask in :PlaySendStreamThread() 331 pid 1013 startch:2 param:0x2
HIDecTask in :PlaySendStreamThread() 331 pid 1014 startch:3 param:0x3
[N5X libplay.a] V1.01.30 Info:(InitVoDev|1129):vodev:0 vpsstpye:0 vpsstart:0 vpsssubchn:2 vostart:0
[N5X libplay.a] V1.01.30 Info:(__CreateTitleVB|1416):create VbPool:2 sucessd
*stvid ch:0 User:6f07d200,Kernel:6f07d200,Read_p:0,Write_p:0,PESSize:140000*
*stvid ch:1 User:6efdc200,Kernel:6efdc200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:2 User:6ef3b200,Kernel:6ef3b200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:3 User:6ee9a200,Kernel:6ee9a200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:4 User:6edf9200,Kernel:6edf9200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:5 User:6ed58200,Kernel:6ed58200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:6 User:6ecb7200,Kernel:6ecb7200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:7 User:6ec16200,Kernel:6ec16200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:8 User:6eb75200,Kernel:6eb75200,Read_p:0,Write_p:0,PESSize:a0000*
libhicap.a INFO (func = CaptureCreate line =>612): ******************************************************************************
libhicap.a INFO (func = CaptureCreate line =>628): HI3520D: libhicap.a Version: V1.01.203 Svn: 8948 Compile at Oct 13 2017 15:57:51
libhicap.a INFO (func = CaptureCreate line =>643): ******************************************************************************
libhicap.a INFO (func = CaptureCreate line =>651): Capture debug addr:0x1e3ae58
libhicap.a INFO (func = init_av_device line =>7682): *************************************************************************
libhicap.a INFO (func = init_av_device line =>7683): g_SYS_CHN=1 g_SYS_ACHN=1 g_PROC_TYPE=6
libhicap.a INFO (func = init_av_device line =>7684): *************************************************************************
libhicap.a INFO (func = create_av_devices line =>1148): create_av_devices, 1
libhicap.a INFO (func = HiSlaveCaptureInit line =>2819): uiEnvcBufSize: 921600
libhicap.a INFO (func = HiSlaveCaptureInit line =>2842): uiAudBufSize: 4096
libhicap.a INFO (func = HiSlaveCaptureInit line =>2859): uiSnapBufSize: 414720
libhicap.a ERROR (func = VencMulChCreate line =>2014): C2404 M 1 0xa0088003
libhicap.a ERROR (func = HiSlaveMulCaptureCreate line =>3433): VencMulChCreate 0
libhicap.a ERROR (func = create_av_devices line =>1190): HiSlaveMulCaptureCreate chn0
libhicap.a ERROR (func = init_av_device line =>7693): F012d C0001
libaudio.a INFO (func = MicAudio_MemInit line =>115): MicAudio_MemInit success!
libhicap.a INFO (func = showDataOtherOSD_thread line =>2482): func showDataOtherOSD_thread ,pid 1015
libaudio.a INFO (func = MicAudio_InInit line =>980): MicAudio In All Flow Create SUCCESS!
libaudio.a INFO (func = MicAudio_GetStream line =>811): MICAudio func MicAudio_GetStream, MicPid 1017
libaudio.a INFO (func = MicAudio_Init line =>1127): MicAudio_Init SUCCESS!
[LIBDVR] u16DevAddr = 34, u8DevReg = 0, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 2, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 4, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 6, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 8, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = c, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = e, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 10, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 12, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 14, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 16, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 18, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 1a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 1d, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 1e, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 20, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 22, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 25, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 26, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 28, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 2a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 2c, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 2e, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 30, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 32, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 34, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 36, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 38, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 3a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 3c, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 40, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 42, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 44, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 46, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 48, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 4a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 4c, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 4e, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 50, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 58, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 5a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 5c, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 5e, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 60, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 62, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 64, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 66, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 68, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 6a, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 6c, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 6e, u32DataLen = 2
[LIBDVR] u16DevAddr = 34, u8DevReg = 70, u32DataLen = 2
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
***************************************************************************
* Lua Engine Version: Lua 5.0.2
* Supported Language: English
* SupportedVideoStand: PAL
***************************************************************************
00:00:42|SecurityUnit|the input num is 2|Src/CipherManager/CipherManager.cpp:45|config()
real stream factory, Src/Rtsp/Client/RtspRealStream.h:189, iid=StreamSource
[IV_3th Last Changed Rev: 478877] 00:00:42 RPCIntervideoClient.cpp:88 init RPCIntervideoComponent Library
[IV_3th Last Changed Rev: 478877] 00:00:42 RPCIntervideoClient.cpp:23 CRPCIntervideoClient CFactory
setLanguage:0
cat: can't open '/mnt/mtd/backtrace.out': No such file or directory
sh: can't create /tmp/backtrace: Read-only file system
sh: tail: not found
mv: can't rename '/tmp/backtrace': No such file or directory
rm: can't remove '/mnt/mtd/backtrace.out': No such file or directory
CSQL_LOGIMP::CSQL_LOGIMP()>>>>>>>>>
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
/mnt/mtd/Log/mnt/mtd/Log00:00:43|[libInfra] [ver:] error tid:983 [Src/Infra3/File.cpp:375] this:0x1e65128 tid:983, FileDefaultOpt::findnext, stat failed fullname(/usr/data//16split_hover.png),err: No such file or directory
[N5X libvos] WARN (func = SplitSetVstd line =>7509): dwStandard:0 should not be here
[N5X libvos] INFO (func = Graphics2SetVstd line =>8616): dwStandard 0
[N5X libvos] INFO (func = Graphics2GetSurface line =>8790): layer:0 :Addr:0x6f9be000 pitch:2560 format:0 [N5X libvos] INFO (func = Graphics2SetColorKey line =>8636): dwKeylow = 0,dwKeyHigh = 0, u32Key:0
[N5X libvos] INFO (func = Graphics2GetSurface line =>8790): layer:0 :Addr:0x6f9be000 pitch:2560 format:0 [N5X libvos] INFO (func = __Dsp_SetResolution line =>7472): resolution 4
[N5X libvos] INFO (func = Graphics2GetSurface line =>8790): layer:0 :Addr:0x6f9be000 pitch:2560 format:0 ///////////////////////////
Init the log(....)!
/mnt/mtd/Log/LogDB
1024
1
2
384
1
backupOperation>>ret:101
CSQL_LOGIMP::Init 1!
init over
///////////////////////////
SubKeyMap:Log_Index(comstring.comchannel) is inserted allready
SubKeyMap:RecOpType(log_info.recoprtype) is inserted allready
SubKeyMap:RecSearchStart(log_info.recsearchstart) is inserted allready
SubKeyMap:RecSearchStop(log_info.recsearchstop) is inserted allready
SubKeyMap:RecPlayFile(log_info.recplayfile) is inserted allready
SubKeyMap:RecPlayStop(log_info.recplaystop) is inserted allready
SubKeyMap:AutoMaintain(ctrl_main.automt) is inserted allready
SubKeyMap:NetCamera(ugm_authdisp.AuthorityDisp_03) is inserted allready
*stvid ch:0 User:6f07d200,Kernel:6f07d200,Read_p:0,Write_p:0,PESSize:140000*
*stvid ch:1 User:6efdc200,Kernel:6efdc200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:2 User:6ef3b200,Kernel:6ef3b200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:3 User:6ee9a200,Kernel:6ee9a200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:4 User:6edf9200,Kernel:6edf9200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:5 User:6ed58200,Kernel:6ed58200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:6 User:6ecb7200,Kernel:6ecb7200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:7 User:6ec16200,Kernel:6ec16200,Read_p:0,Write_p:0,PESSize:a0000*
*stvid ch:8 User:6eb75200,Kernel:6eb75200,Read_p:0,Write_p:0,PESSize:a0000*
SubKeyMap:MatrixTour(titles.videomatrix) is inserted allready
[N5X libvos] INFO (func = __VideoSetIQIMode line =>9771): Enable:1
[N5X libvos] INFO (func = Video2Switch line =>9509): index=0, dwType=0
[N5X libvos] INFO (func = DealPendingCmd line =>5667): VosCmd_VideoSwitch
[N5X libvos] INFO (func = DealPendingCmd line =>5504): VosCmd_SplitCombine type:0
[N5X libvos] INFO (func = __VideoSetIQIMode line =>9771): Enable:1
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:0 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:1 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:2 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:3 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:4 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:5 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:6 getLoginErr failed
00:00:43|[Unknown] [ver:Unknown] error MonitorPlayer.cpp setFBOSD 276 tid:983 m_chan:7 getLoginErr failed
libaudio.a INFO (func = AudioOutPriority line =>3649): type:0
libaudio.a INFO (func = TalkSetVolume line =>3637): chn=0, lv=50, rv=50
libaudio.a INFO (func = AudioOutSourceEnable line =>3664): audio type:2, 1
libaudio.a INFO (func = AudioOutSourceEnable line =>3664): audio type:2, 0
[N5X libplay.a] V1.01.30 Info:(DealPendingCmd|767):CMD_AUDIOSWITCH param:1048575
SubKeyMap:PTZ(titles.ptzctrl) is inserted allready
SubKeyMap:PTZAlarm(titles.ptzctrl) is inserted allready
1 /usr/bin/lua/ptz
lua filename AD1641M.lua
lua filename ADMatrix.lua
lua filename Banknote.lua
lua filename CATU.lua
lua filename DH-CC440.lua
lua filename DH-MATRIX.lua
lua filename DH-SD1.lua
lua filename DH-SD2.lua
lua filename EPTZ.lua
lua filename General.lua
lua filename HAIYU.lua
lua filename HD-CVI.lua
lua filename HD-CVI2.0.lua
lua filename HY.lua
lua filename LiLin.lua
lua filename Mercer-1.lua
lua filename Mercer.lua
lua filename PANASONIC.lua
lua filename PELCOD-S.lua
lua filename PELCOD-S1.lua
lua filename PHILIPS.lua
lua filename PIH-717.lua
lua filename Pe5051k.lua
lua filename Pelco-9750.lua
lua filename PelcoASCII.lua
lua filename PelcoD-DON.lua
lua filename PelcoD.lua
lua filename PelcoD1.lua
lua filename PelcoD1_Tour.lua
lua filename PelcoD_Tour.lua
lua filename PelcoP-A.lua
lua filename PelcoP-HK.lua
lua filename PelcoP-SD.lua
lua filename PelcoP.lua
lua filename PelcoP1-A.lua
lua filename PelcoP1.lua
lua filename PelcoP5.lua
lua filename QT-2XXD.lua
lua filename RM110.lua
lua filename SAE.lua
lua filename SANLI.lua
lua filename SANTACHI.lua
lua filename SHARP.lua
lua filename SIERA-D.lua
lua filename SIERA-P.lua
lua filename SONY.lua
lua filename Samsung.lua
lua filename Videon-X.lua
lua filename Videon_D.lua
lua filename Videon_P.lua
lua filename WV-CS850I.lua
lua filename WV-CS850II.lua
lua filename WV-CS950.lua
lua filename Yaan.lua
2 /mnt/mtd/Config/ptzPlugin
The following PTZ protocols have been loaded:
AD1641M,ADMATRIX,BANKNOTE,CATU,DH-CC440,DH-MATRIX,DH-SD1,DH-SD2,EPTZ,General,HAIYU,HD-CVI,HD-CVI2.0,HY,LILIN,Mercer,Mercer-1,PANASONIC,PE5051K,PELCO-9750,PELCOASCII,PELCOD,PELCOD-DON,PELCOD-S,PELCOD-S1,PELCOD-T,PELCOD1,PELCOD1-T,PELCOP,PELCOP-A,PELCOP-HK,PELCOP1,PELCOP1-A,PELCOP5,PHILIPS,PIH-717,PelcoP-SD,QT-2XXD,RM110A,SAE,SAMSUNG,SANLI,SANTACHI,SHARP,SIERA-D,SIERA-P,SONY,Videon-D,Videon-P,Videon-X,WV-CS850I,WV-CS850II,WV-CS950,YAAN
SubKeyMap:VideoColor(conf_img.colorset) is inserted allready
SubKeyMap:Encode(titles.imgset) is inserted allready
SubKeyMap:VideoWidget(conf_img.overlap) is inserted allready
SubKeyMap:WaterMark(titles.watermark) is inserted allready
SubK
eyMap:AudioInFormat(titles.audioFormat) dh_watchdog_open
is inserted allready
[LIBDVR] WARN (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdv[DRVBOX] Settint DefaultTimeout:180 seconds
r/src/libsysbase/build/../src/watchdog/watchdog.c|WatchdogCreate|81): Creating watchdogs
[LIBDVR] Creating New Watchdog Devs, Total 1 Devices
[LIBDVR] Watchdog[0], Type[SOFT]
[LIBDVR] Creating soft watchdog
[LIBDVR] open device[/dev/dh_watchdog], default timeout[180]
[LIBDVR] opening watchdog device
[LIBDVR] SoftWatchDog Keeping...(fd=87)
KeepAlive ff a 0 0!
SubKeyMap:NetIPFilter(titles.netset) is inserted allready
SubKeyMap:NetMultiCast(titles.netset) is inserted allready
SubKeyMap:NetPPPOE(titles.netset) is inserted allready
SubKeyMap:DHCP(titles.netset) is inserted allready
SubKeyMap:NetDDNS(titles.netset) is inserted allready
SubKeyMap:NetAlarmServer(titles.netset) is inserted allready
SubKeyMap:NetNTP(titles.netset) is inserted allready
SubKeyMap:NetDns(titles.netset) is inserted allready
------------ protocol is []######### init ###############
[IV_3th Last Changed Rev: 478877] 00:00:43 HttpRtspClient.cpp:546 initHttpRtspComponentLibrary()! [Compiled at Oct 13 2017-15:28:42]
>>>>>m_uiSupportManuFactory is 800000400001
1970-01-01 00:00:44(1c8a000) dhnetsdk(x86) file version 3.41.13397 #2014-07-08 14:39:49
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
sh: can't create /sys/block/sda/queue/read_ahead_kb: nonexistent directory
LIBHD_MSG: Support ESATA function.
LIBHD_MSG: Support ESATA function.
LIBHD_MSG: VERSION INFO :1773, COMPILE TIME:Oct 13 2017 15:21:44
LIBHD_MSG: Find disk number : 0
DHFS: two --------------------------index
DHFS: DHFS Version $Rev: 487009 $, Built in Oct 13 2017 15:19:23
DHFS: g_disk_num = 0
DHFS: none type 0 driver!
DHFS: none type 1 driver!
DHFS: none type 2 driver!
DHFS: none type 3 driver!
DHFS: none type 4 driver!
DHFS: none type 5 driver!
DHFS: none type 6 driver!
DHFS: none type 7 driver!
DHFS: none type 8 driver!
DHFS: none type 9 driver!
DHFS: none type 10 driver!
DHFS: none type 11 driver!
DHFS: none type 12 driver!
DHFS: none type 13 driver!
DHFS: none type 14 driver!
DHFS: none type 15 driver!
DHFS: none type 16 driver!
DHFS: none type 17 driver!
DHFS: none type 18 driver!
DHFS: none type 19 driver!
DHFS: none type 20 driver!
DHFS: none type 21 driver!
DHFS: none type 22 driver!
DHFS: none type 23 driver!
DHFS: none type 24 driver!
DHFS: none type 25 driver!
DHFS: none type 26 driver!
DHFS: none type 27 driver!
DHFS: none type 28 driver!
DHFS: none type 29 driver!
DHFS: none type 30 driver!
DHFS: none type 31 driver!
DHFS: none type 32 driver!
DHFS: none type 33 driver!
DHFS: none type 34 driver!
DHFS: none type 35 driver!
DHFS: none type 36 driver!
DHFS: none type 37 driver!
DHFS: dh_file_sys_init() end============================
DHFS: none type 0 driver!
DHFS: none type 1 driver!
DHFS: none type 2 driver!
DHFS: none type 3 driver!
DHFS: none type 4 driver!
DHFS: none type 5 driver!
DHFS: none type 6 driver!
DHFS: none type 7 driver!
DHFS: none type 8 driver!
DHFS: none type 9 driver!
DHFS: none type 10 driver!
DHFS: none type 11 driver!
DHFS: none type 12 driver!
DHFS: none type 13 driver!
DHFS: none type 14 driver!
DHFS: none type 15 driver!
DHFS: none type 16 driver!
DHFS: none type 17 driver!
DHFS: none type 18 driver!
DHFS: none type 19 driver!
DHFS: none type 20 driver!
DHFS: none type 21 driver!
DHFS: none type 22 driver!
DHFS: none type 23 driver!
DHFS: none type 24 driver!
DHFS: none type 25 driver!
DHFS: none type 26 driver!
DHFS: none type 27 driver!
DHFS: none type 28 driver!
DHFS: none type 29 driver!
DHFS: none type 30 driver!
DHFS: none type 31 driver!
DHFS: none type 32 driver!
DHFS: none type 33 driver!
DHFS: none type 34 driver!
DHFS: none type 35 driver!
DHFS: none type 36 driver!
DHFS: none type 37 driver!
driver basic parameter:
----------------------------------------------------------------------------------------------------
| dev.part |type|total_clus | temp_off | index_off | dir_off | data_off | rev_clus | sec/clus |status|sec_dir_off|part_off|
|----------|----|-----------|----------|-----------|---------|----------|----------|----------|------|-----------|--------|
------------------------------------------------------------------------------------------------
driver operation parameter:
----------------------------------------------------------------------------------------------------------------------------------
| dev.part | F| S|e_clus | curr | start1 | end1 | start2 | end2 |
| | | | | |MM-DD HH:MM:SS| clus |MM-DD HH:MM:SS| clus |MM-DD HH:MM:SS| clus |MM-DD HH:MM:SS| clus |
|----------|--|--|--------|--------|--------------|--------|--------------|--------|--------------|--------|--------------|--------|
----------------------------------------------------------------------------------------------------------------------------------
driver time chart:
--------------------------------------------------------------------------
|dev.part | period of time |
|---------|----------------------------------------------------------------|
------------------------------------------------------------------------
driver time sections:
------------------------------------------------------------------------
|dev part |start_clus| end_clus | start_time | end_time |
------------------------------------------------------------------------
sh: can't create /sys/block/sda/queue/read_ahead_kb: nonexistent directory
[N5X libvos] WARN (func = CloseLogo line =>9722): disable=1
[N5X libvos] INFO (func = Graphics2SetAlpha line =>8669): index:0 alpha:255 delta:0
SubKeyMap:RECWorksheet(titles.timing) is inserted allready
SubKeyMap:Record(titles.timing) is inserted allready
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:00:45|[NetProt-466498] [ver:] error tid:1059 Src/IPv6ConflictCheck.cpp,819: no this node!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
--- Evi --- PageDeviceInitSetPwd.cpp initAutoLayoutItems 47 >
--- Evi --- PageDeviceInitSetPwd.cpp initAutoLayoutItems 47 >
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
###################### Page Layout Wrong:Desktop ######################
Two Items overlaped each other,Please Check!!!
Item1 Info:Type = 17,Text = D1 Item2 Info:Type = 17,Text = CH
Item1 rect1[857 706 891 726] Item2 rect2[857 684 891 708]
00:00:47|[] [ver:] error tid:983 Call g_IntelCfgMag.getConfig failed! configname(VSP_HS) topname(VSP_HS)
status = a6[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
00:00:47|warn User/UgmManage.cpp:2851[getPasswordEncryptType], type:1
login username:default password ******.IPLocal;......ret:1.
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:0 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:1 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:2 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:3 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:4 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:5 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:6 param:280
[N5X libplay.a] V1.01.30 Debug:(DealPendingCmd|804):CMD_SETPOLICY, ch:7 param:280
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:0 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:1 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:1 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:2 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:2 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:3 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:3 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:4 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:4 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:5 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:5 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:6 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:6 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:7 Num:8!
[N5X libvos] INFO (func = DealPendingCmd line =>5895): ch:7 VosCmd_SetOriginalRatioDisplay enable:0 winnum:8
[N5X libvos] INFO (func = SetChnOriginalRatioDisplayCmd line =>5001): ConfigNum:0 Num:8!
SubKeyMap:Log_Index(comstring.comchannel) is inserted allready
SubKeyMap:Log_Code(conf_alm_event_type) is inserted allready
DisablePPPOE called,disable pppoe, SIGTREM pid[0]
[LIBDVR] WARN (/home/jenkins/jk_slave/workspace/NVR_DH3.0956_NVR2XXX-S/tmp_build_dir/libdvr/src/libsysbase/build/../src/system/system_func.c|SysSetCurTime|70): YEAR = 100
[SYSNET-24586] MSG [ usrMode ] Add eth0's RouteEntry: IP:192.168.1.108, dst:192.168.1.0, maskNum:24, ( defDev:eth0 )
[SYSNET-24586] MSG [ usrMode ] Add eth0's RouteEntry: IP:192.168.1.108, dst:192.168.1.0, maskNum:24, ( defDev:eth0 )
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
INVALID HANDLE: Src/file.c,1066
CDriverManagerImp::checkDiskExist errFS:7
SubKeyMap:Comm(titles.comctrl) is inserted allready
[LIBDVR] Setting Attr[1]
[LIBDVR] Attr[115200 8 0 0]
[LIBDVR] Using Normal
------------------------- CDeviceRtspSvr_V3::Start
00:00:48|warn User/UgmManage.cpp:2851[getPasswordEncryptType], type:1
00:00:48|[] [ver:] error tid:983 Call g_IntelCfgMag.getDefault failed! configname(Multicast)
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:6 micinit:1
setinformat get here 11 6
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513):[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInCreate line =>3381): MicAudio Init!
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
libaudio.a INFO (func = AudioInSetFormat line =>3513): EncodeType: 11
libaudio.a INFO (func = AudioInSetFormat line =>3525): AudSetFmt tpye:11 nowtype:11 micinit:1
00:00:48|[] [ver:] error tid:983 Call g_IntelCfgMag.getConfig failed! configname(UserGlobal) topname(UserGlobal)
|00:00:48|[StreamApp@492088][ConfigSupplier.h:179]|ERR [0x7eb0d0ec], tid:983, rtp_size=24, rhs's=0, ts_size=24, rhs's=0, udp_size=0, rhs's=0,dh_size=0, rhs's=0.
|00:00:48|[StreamApp@492088][RtspServiceLoader.cpp:1009]|WARN [0x101b81c], tid:983, Component::getComponentInstance<ITsMulticastService> failed!
|00:00:48|[StreamApp@492088][RtspServiceLoader.cpp:1020]|WARN [0x101b81c], tid:983, Component::getComponentInstance<IUdpMulticastService> failed!
|00:00:48|[StreamApp@492088][ConfigSupplier.h:179]|ERR [0x7eb0d0ec], tid:983, rtp_size=24, rhs's=24, ts_size=24, rhs's=24, udp_size=0, rhs's=0,dh_size=24, rhs's=0.
|00:00:48|[StreamApp@492088][RtspServiceLoader.cpp:1009]|WARN [0x101b81c], tid:983, Component::getComponentInstance<ITsMulticastService> failed!
|00:00:48|[StreamApp@492088][RtspServiceLoader.cpp:1020]|WARN [0x101b81c], tid:983, Component::getComponentInstance<IUdpMulticastService> failed!
|00:00:48|[StreamApp@492088][RtspServiceLoader.cpp:1046]|WARN [0x101b81c], tid:983, Component::getComponentInstance<ITsMulticastService> failed!
|00:00:48|[StreamApp@492088][RtspServiceLoader.cpp:1057]|WARN [0x101b81c], tid:983, Component::getComponentInstance<IUdpMulticastService> failed!
00:00:48|[] [ver:] error tid:983 Call g_IntelCfgMag.getConfig failed! configname(NetAutoAdaptEncode) topname(NetAutoAdaptEncode)
|00:00:48|[StreamApp@492088][ConfigSupplier.cpp:553]|ERR [0x30555e0], tid:983, get NetAutoAdaptor failed
|00:00:48|[StreamApp@492088][ConfigSupplier.h:179]|ERR [0x3088f78], tid:983, rtp_size=0, rhs's=24, ts_size=0, rhs's=24, udp_size=0, rhs's=0,dh_size=0, rhs's=24.
00:00:49|[NetApp-464946] [ver:] warn tid:983 tid:983, CProviderManager::start is started.
[Src/PushNotification/ProviderManager.cpp:47]
feng#########[23]
feng#########[28]
[IVU][notifyLastState:103] table[null
]
feng#########[23]
easy4ip>>>setDefault config:
{
"DMS" : {
"ServerDomain" : ""
},
"DeviceID" : "4H04EC5PAZB31D0"
}
CEasy4IPComm::checkRunState T2UServer[{
"Address" : "www.easy4ipcloud.com",
"Enable" : true,
"HttpsRegisterPort" : 12367,
"Key" : "YXQ3Mahe-5H-R1Z_",
"Port" : 8800,
"RegisterPort" : 12366,
"RegisterServer" : "www.easy4ip.com",
"ThreadNum" : 1,
"Type" : "dhp2p",
"UUID" : "4H04EC5PAZB31D0",
"WebVersion" : "3.205.0"
}
]
Need run Easy4IP.
#########CInterVideoUpgrate::Run([86]
Domain:dms.easy4ipcloud.com
killall: telnetd: no process killed
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:00:52|[NetProt-466498] [ver:] warn tid:1034 [getByNet:132]getAddrInfo failed, request[0] timeout,www.easy4ipcloud.com ref 1 times!
00:00:52|[NetApp-464946] [ver:] error tid:1034 tid:1034, IDNSManager::instance()->getaddrinfo failed! [Src/P2P/P2P.cpp:781]
00:00:52|[NetProt-466498] [ver:] warn tid:1089 [getByNet:132]getAddrInfo failed, request[1] timeout,dms.easy4ipcloud.com ref 1 times!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
CDriverManagerImp::checkDiskExist errFS:7
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
00:00:54|[NetApp-464946] [ver:] warn tid:1034 tid:1034, Code is not support! [Src/P2P/ASRegister.cpp:77]
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:00:55|[NetProt-466498] [ver:] warn tid:1089 [getByNet:132]getAddrInfo failed, request[1] timeout,dms.easy4ipcloud.com ref 1 times!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:00:57|[NetProt-466498] [ver:] warn tid:1099 [getByNet:132]getAddrInfo failed, request[0] timeout,www.easy4ipcloud.com ref 1 times!
00:00:57|[NetApp-464946] [ver:] error tid:1099 tid:1099, IDNSManager::instance()->getaddrinfo failed! [Src/P2P/P2P.cpp:781]
00:00:57|[NetProt-466498] [ver:] warn tid:1034 [getByNet:132]getAddrInfo failed, request[2] timeout,www.easy4ip.com ref 1 times!
00:00:57|[NetProt-466498] [ver:] warn tid:1034 [tid:1034] Resolv server domain name www.easy4ip.com failed! [Src/DdnsPrivateP2p.cpp:93]
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
CDriverManagerImp::checkDiskExist errFS:7
00:00:58|[NetProt-466498] [ver:] warn tid:1089 [getByNet:132]getAddrInfo failed, request[1] timeout,dms.easy4ipcloud.com ref 1 times!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:01:01|[NetProt-466498] [ver:] warn tid:1089 [getByNet:132]getAddrInfo failed, request[1] timeout,dms.easy4ipcloud.com ref 1 times!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:01:02|[NetProt-466498] [ver:] warn tid:1034 [getByNet:132]getAddrInfo failed, request[0] timeout,www.easy4ipcloud.com ref 1 times!
00:01:02|[NetApp-464946] [ver:] error tid:1034 tid:1034, IDNSManager::instance()->getaddrinfo failed! [Src/P2P/P2P.cpp:781]
[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
CDriverManagerImp::checkDiskExist errFS:7
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[LIBDVR] SoftWatchDog Keeping...(fd=87)
KeepAlive ff a 0 0!
00:01:04|[NetProt-466498] [ver:] warn tid:1089 [getByNet:132]getAddrInfo failed, request[1] timeout,dms.easy4ipcloud.com ref 1 times!
connectToDMS domainToIP failed.
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SYSNET-24586] MSG P1: is down
[SYSNET-24586] MSG P2: is down
[SYSNET-24586] MSG P3: is down
[SYSNET-24586] MSG P4: is down
[SYSNET-24586] MSG P5: is down
[SYSNET-24586] MSG P6: is down
[SYSNET-24586] MSG P7: is down
[SYSNET-24586] MSG P8: is down
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
[SWITCH-25519] MSG (mv6071_port_process|1331): port2 link down to up!
00:01:07|[NetProt-466498] [ver:] warn tid:1034 [getByNet:132]getAddrInfo failed, request[0] timeout,www.easy4ipcloud.com ref 1 times!
00:01:07|[NetApp-464946] [ver:] error tid:1034 tid:1034, IDNSManager::instance()->getaddrinfo failed! [Src/P2P/P2P.cpp:781]
00:01:07|[NetProt-466498] [ver:] warn tid:1099 [getByNet:132]getAddrInfo failed, request[2] timeout,www.easy4ip.com ref 1 times!
00:01:07|[NetProt-466498] [ver:] warn tid:1099 [tid:1099] Resolv server domain name www.easy4ip.com failed! [Src/DdnsPrivateP2p.cpp:93]
)
